25 Jul 2007

Control High Current Devices Using Microcontrollers

July 25th 2007 by Kristi Keorkunian ( Instructional)

This article explains how to use low amperage microcontroller signals to control high current devices. Also instructs the reader on how to use transistors to get from the logic of a microcontroller to the power needs of a motor. If you understood that, you’re good to go, and here’s the link!

6 Instructionals until the contest - sponsored by LadyAda!


Tags:

Permalink | Trackback | Digg this story 

Comments

  1. MAKE: Blog
    July 26th, 2007 | 2:20 pm

    Controling High-Current Devices Via Microcontrollers

    The latest piece on uC Hobby is a how-to on using low-amperage microcontroller signals to control high-current devices. Among other things, it explains how to use transistors to get from the logic of a MCU to the power needs of…

  2. pick up
    July 28th, 2007 | 5:42 pm

    mysteryman

    this book is awsome i recommend it to everybody the show is coming out aug 1

Leave a reply